The papermaking level corrector is a mechanical device that is mainly used to accurately adjust the level of paper during the forming and drying stages of the papermaking process to ensure that the paper can be conveyed and formed smoothly. This corrector can fine-tune the paper forming mesh by adjusting the air tire pressure or mechanical structure, thereby preventing the paper from deviating and improving the quality and production efficiency of the paper.
Correct the deviation of the papermaking wire to ensure that the papermaking wire always runs along the center line of the papermaking machine, thereby preventing the papermaking mesh from being damaged during operation
Fixed base plate: The fixed base plate is the basic part of the calibrator, and its bottom fixed sleeve is equipped with evenly distributed fixed blocks.
Support rod: The support rod is movably connected to the internal fixed block through a connecting rod, and the external thread of its bottom end is equipped with a positioning sleeve rod.
Limiting sleeve: The limiting sleeve is fixed to the top of the fixed base plate, and the internal movable sleeve is equipped with a sliding rod, and the bottom end of the sliding rod is fixedly connected to the top of the sliding block.
Fastening device: The fastening device is fixed on both sides of the sliding block to fasten and adjust the position of the sliding rod.
Extrusion device: The extrusion device is mounted on one side of the positioning plate through a rotating block, and is used to accurately extrude and adjust the sliding block.
Moving sleeve plate: The movable sleeve plate is internally equipped with a movable sleeve block located between two fixing devices, and is fixedly connected to the bottom of the calibrator through a connecting rod.
We will contact you within 1 working day, please pay attention to the email with the suffix “@jennypapermachine.com”.
